Leica DISTO™ transfer

Cho phép gửi các giá trị đo lường từ Leica DISTO của bạn vào một bảng tính.

The program connects to Leica DISTO™ devices using a Bluetooth interface (current models are Leica DISTO™ D3aBT, Leica DISTO™ D330i and Leica DISTO™ D8). From your Android device, you can remotely trigger measurements and /or you can transfer the measurement data from the Leica DISTO™ into the Clipboard. Once they are in the Clipboard, they can be inserted into any application.

Now you can also transfer your measurements directly into an Excel file. You can either generate this file on the Android device itself or you can and open any Excel file previously used on another computer beforehand. The most common formulas from Excel are ed.

You are transfering the measurements in the currently active Excel cell. For navigation you can use the touchscreen of your Android device or the navigation keys on your Leica DISTO™.

The following Leica DISTO™ devices are ed:

Leica DISTO™ plus

Leica DISTO™ A6

Leica DISTO™ D8

Leica DISTO™ D3aBT

Leica DISTO™ D330i

Please note: this program only runs properly on Android devices version 2.3.3 or higher with Bluetooth Serial Port Profile (SPP). Due to the vast amount of existing Android devices, not all can be tested. Successful results were achieved by using the Samsung Galaxy tablet computers (e.g. Samsung Galaxy Tab 7.0 PlusN) or the Samsung Galaxy S3 Smartphone.

For devices running on Android 4.3 or higher please use the DISTO™ transfer BLE which also s the Bluetooth 4.0 interface.